Publicité
1.2 Installation
Fuels
Low smoke, trouble-free operation of the stove and a supply of heat at the nominal
level with a chimney draught of 12 Pa are only guaranteed when you use the fol-
lowing fuels and no others.
Only use natural, dry chopped firewood with a remaining humidity of max. 20%.
Fuel Type
Hardwood
Softwood
Wood briquette according to DIN 51731
With the primary air damper, do you adjust the rated output.
There may be engaged in only the settings and fuel quantities are
given that correspond to your licensed or purchased device.
Adjustment:
Warning up, kindling
Wood
Nominal heat output
Putting out of working order
Filling quantities 8 kW
- Split billet: max. length: 25-33 cm, max. 2 billets per filling, appr. 2.0 kg, (≈ 2,6 kg/h)
- Wooden briquette DIN 51731: max. 1.6 kg
IT IS NOT ALLOWED to burn waste, fine chipping, bark, wood handled with pre-
ventive chemicals, furthermore paper and cardboard. For kindling please use wood
scrapings or grill starter but never use liquid auxiliaries!
The first kindling
At the first fire set-up could be a little smoke, but is not dangerous, normal!
•
In this time, please ventilate the room carefully!
Warning! Upon the first kindling, smoke and unpleasant smell may be gener-
ated. Always ensure the proper ventilation of the room (by opening windows
and doors), and heat the fireplace at maximum rated heating performance. If
with the first heating the maximum temperature is not reached, the above-
mentioned effects may as well arise later on.
Before installation pull out the delivery securer off the refractory brick through the
furnace chamber (picture no. 6).
Calorific value approx.
Setting of the primary air
regulator
8,0 kW
II
III
close I
Table 1
24
kWh/kg
4,0 – 4,2
4,3 – 4,5
5,0 – 5,2
Burning time
-
ca. 0,75 h
-
Publicité
