Publicité
2.5
If a subwoofer or external power amplifier is to be used, the NaimUniti 2 preamp or subwoofer output must be configured. Enter
Setup Mode and select Speakers followed by Type. Select Large if no subwoofer or external power amplifier is to be used. Select
Large+Sub if both the NaimUniti 2 internal amplifier and a subwoofer or an additional external amplifier is to be used. Select
Small+Sub if a subwoofer or external power amplifier is to be used in combination with restricted bandwidth speakers connected
to the NaimUniti 2 speaker outputs. Select None if no speakers are to be connected to the NaimUniti 2 speaker outputs.
2.6
NaimUniti 2 is configured when shipped to connect to wired TCP/IP home networks automatically. However, if your NaimUniti 2
has been previously used and its network configuration altered, or your router requires nonstandard settings, it may not be able
to do so. Refer to the Reference Manual if this appears to be the case.
If a wireless network connection is to be used, your NaimUniti 2 will require configuration to join the network. Enter Setup Mode
and select the Network Settings option to configure the NaimUniti 2 wireless settings.
2.7
To adjust the NaimUniti 2 volume use either the front panel volume buttons or the handset volume keys.
3.
3.1
NaimUniti 2 inputs can be selected by pressing the front panel input button, the handset navigation (56) keys or one of the
handset input selection keys.
3.2
Pressing one of the handset input selection keys either selects a single input or scrolls through a group of inputs. For example,
pressing the radio key scrolls through a group comprising the FM, DAB and iRadio inputs. To modify the key assignments enter
Setup Mode and select Handset Keys.
3.3
When NaimUniti 2 is connected to a network with high speed internet access it will automatically download a list of available
internet radio stations. When the iRadio input is subsequently selected, a menu will be displayed that lists all the available
stations. Use the handset navigation (563) and ok/list keys to browse the list and select stations.
®
3.4
NaimUniti 2 can play Spotify
streams via the Spotify
®
receipt of a Spotify
stream, the NaimUniti 2 will automatically select its Spotify
®
it can be controlled using the Spotify
3.5
NaimUniti 2 can play audio streams over a Bluetooth wireless connection from appropriately equipped playback devices.
NaimUniti 2 is configured by default to require "pairing" with a Bluetooth streaming device before it can play a Bluetooth audio
stream. To pair a NaimUniti 2 with a Bluetooth device select the Bluetooth input and press the handset play/pause key (
NaimUniti 2 will become available for pairing in the Bluetooth device setup menu. Once successfully paired with the Bluetooth
device, the NaimUniti 2 will be available to the audio apps on the device. NaimUniti 2 will switch automatically to its Bluetooth
input when in receipt of a Bluetooth stream. The NaimUniti 2 Bluetooth input setup menu offers further Bluetooth configuration
options including "open" pairing.
3.6
NaimUniti 2 can play TIDAL streams via the Naim App. When in receipt of a TIDAL stream the NaimUniti 2 will automatically
select its TIDAL input. Playback can be controlled using the the Naim app, the handset or the front panel controls. TIDAL
streaming requires a TIDAL subscription.
Selecting Inputs
®
Connect facility incorporated in some Spotify
®
input. Once Spotify
app, the Naim app or the NaimUniti 2 handset or front panel controls.
Speakers
4 Type:
Max. Volume:
Balance:
Network Settings
4Name:
Wireless:
Status: Not Connected
DHCP:
Note 3: The Naim app, available from the iTunes App Store and Google
Play Store, enables wireless touch screen control from iOS and Android
devices.
Internet Radio
Added stations
Naim's Choice
4Location
®
player apps. When in
Genre
®
playback is established,
Bluetooth
4Enabled:
). The
Name:
Input Trim:
Discovery: Uniti2 BT XX..
NaimUniti 2 • English
1/3
Large+Sub
100
0
1/5
Uniti2-XXXX
Not Used
Yes
3/8
Note 3.4: The default NaimUniti 2 network
name (Uniti2-XXXX) incorporates the last
four characters of the unit's MAC address.
The full MAC address is listed in the
Network Settings menu.
1/5
Yes
Note 3.5: The default NaimUniti 2 Bluetooth
Bluetooth
name (Uniti2 BT XXXX) incorporates the last
0
four characters of the unit's MAC address.
Publicité
