Publicité
ASSEMBLY
TO ASSEMBLE HYDRAULIC RAM, PUMP UNIT, AND ATTACHMENTS
1. Unscrew and save the End Plugs located on the
ends of the Hose and Hydraulic Ram.
2. Securely screw the Hose into the Hydraulic Ram.
3. Insert the Pump Handle into the receptacle
located at the top of the Pump Unit.
4. To attach the Rubber Head, the Extension Bars,
the Male Connector, and the Flat Base to the
Hydraulic Ram.
Rubber head
Hydraulic Ram
flat Base
Extension Bars
Male Connector
5. To attach the Spreader Wedge to the Pump Unit.
Pump Unit
6. For other attachment combinations.
Rubber Head
Hydraulic Ram
Extension Bars Spreader Ram Toe
Flat Base
Hydraulic Ram
flat Base
Hydraulic Ram
5
Spreader Wedge
Flat Base
Male Connector
Male Connector
Extension Bars
Rubber head
Male Connector
Publicité
