Publicité
ADDITIONAL WARNINGS:
• DO NOT USE MOTOR OIL IN THE PRODUCT.
• ONLY USE ANTI-FOAMING JACK OIL.
• ALWAYS USE A GOOD GRADE HYDRAULIC JACK OIL.
• DO NOT USE HYDRAULIC BRAKE FLUID, ALCOHOL, GLYCERINE, DETERGENT, MOTOR OIL OR
DIRTY OIL.
• USE OF A NON-RECOMMENDED FLUID CANCAUSE DAMAGE TO A PRODUCT.
• AVOID MIXING DIFFERENT TYPES OF FLUID AND NEVER USE BRAKE FLUID, TURBINE OIL,
TRANSMISSION FLUID, MOTOR OIL OR GLYCERIN. IMPROPER FLUID CAN CAUSE PREMATURE
FAILURE OF THE PRODUCT AND THE POTENTIAL FOR SUDDEN AND IMMEDIATE LOSS OF
LOAD.
• DISPOSE OF HYDRAULIC FLUID IN ACCORDANCE WITH LOCAL REGULATIONS.
LUBRICATION
1. When not in use, the Pump Unit should be stored with the Release Valve open and the Pump Piston fully
retracted.
2. A coating of light lubricating oil to pivot points,
axles and hinges will help to prevent rust.
3. Periodically check the Pump Piston and Rams for
signs of rust or corrosion. Clean as needed and
wipe with a soft non-abrasive clean cloth.
Clean
Clean
4. When Cylinder Rams are not in use, store ram
fully retracted. Clean as needed and wipe with a
soft non-abrasive clean cloth.
Full retracted
12
Publicité
