Publicité
RAM KIT USE AND CARE
• Do not modify the ram kit in any way. Unauthorized modification may impair the function and/or safety and
could affect the life of the equipment. There are specific applications for which the Ram Kit was designed.
• Always check of damaged or worn out parts before using the Ram Kit. Broken parts will affect the Ram Kit
operation. Replace or repair damaged or worn parts immediately.
• Store idle. When Ram Kit is not in use, store it in a secure place out of the reach of children. Inspect it for
good working condition prior to storage and before re-use.
• Not for use by children or people with reduced mental capacity.
• Do not use under the influence of drugs or alcohol.
• Ensure children and other bystanders are kept at a safe distance when using Ram Kit.
INSPECTION
• Inspect the Ram Kit carefully before each use. Ensure the Product is not damaged, excessively worn, or
missing parts.
• Do not use the Ram Kit unless it is properly lubricated.
• Using a Ram Kit that is not in good clean working condition or properly lubricated may cause serious injury.
• Inspect the work area before each use. Make sure it is free and clear of any potential hazards.
GENERAL SAFETY INSTRUCTIONS
• Save these instructions.
• For your safety, read, understand, and follow the information provided with and on this product before
using.
• The owner and/or operator of this equipment shall have an understanding of safe use/operating procedures
before attempting to use.
• The owner and/or operator shall be aware that the use of this product may require special skills and
knowledge.
• Instructions and safety information shall be conveyed in the operator's native language before use of this
device is authorized.
• If any doubt exists as to the safe and proper use of this product as outlined in this factory authorized
manual, remove from service immediately.
• Inspect before each use.
• Do not use if broken, bent cracked, or damaged parts (including labels) are noted.
• If the product appears damaged in any way, operates abnormally or is missing parts, it should be removed
from service immediately and the distributor should be notified.
• If you suspect that the product was subjected to a shock load (a load suddenly dropped unexpectedly
upon it), immediately discontinue use until product has been clocked by a factory authorized service center
(contact distributor or manufacturer for list of Authorized Service Centers).
• It is recommended that an annual inspection be done by qualified personnel.
• Labels and owner's manuals are available from the distributor.
SAFETY MARKINGS
WARNING!
1. Study, understand, and follow all instructions before operating this device.
2. Do not exceed rated capacity.
3. Use only on hard, level surfaces, with less than 3 degrees of slope.
4. Lifting device only. Immediately after lifting, support the vehicle with appropriate means.
5. Do not move or dolly the vehicle while on the jack.
6. Lift only on areas of the vehicle as specified by the vehicle manufacturer.
7. No alterations shall be made to this product.
8. Only attachments and/or adapters supplied by the manufacturer shall be used.
9. Do not get under or allow anyone under the vehicle until it has been supported by jack stands.
10. Center load on saddle prior to lifting.
11. Use wheel chocks or other blocking device on opposing wheels before using jack.
12. Never use on a lawn mower or lawn tractor.
13. Do not use this jack for any use other than the manufacturer specified usage.
14. Do not rock the vehicle while working on or around equipment.
15. The following are not recommended for supporting on this equipment: Foundations, Homes, Mobile
Homes, Trailers, RV's, Campers, nor Fifth Wheels, etc...
16. Failure to heed these markings may result in personal injury and/or property damage.
4
Publicité
