Switch on/turn off
To switch on the wine cooler, press the
To turn off the appliance, press and hold the
Temperature Setting
Press
button to set the internal temperature of each zone. Temperatures in degrees will appear
on every screen
corresponding to distinct area for the top
Note:When the
preset temperature, 10 ° C/50 ° F for the upper and 16 ° C/60 ° F for the lower compartment.
Press the
button once. The display for the upper compartment will flash. Press
buttons to increase/decrease the temperature.
If you press again the
Press
/
buttons to increase/decrease the temperature.
When working with both upper and lower zone, setting temperature of upper zone must be lower
than the lower zone as factory default setting.
Interior light
The cooler has an interior light. The light can be switched on and off by using the
Note: To see the temperature of each zone at any time. Touch the
temperature temporarily flash on the display for about 5 seconds. Use the "SET" to see the selected
temperature zone or the other.
IMPORTANT: When the temperature is changed, the compressor works harder to reach the
required temperature. During this time, the side panels of the wine cooler can reach up to 45°C
however they will cool down when the set temperature is reached.
button is pressed for the first time, the LED displays indicate the factory
button, the display for the lower compartment will flash.
+
buttons and hold 5 seconds.
+
buttons and hold 5 seconds.
and the lower compartment
/
button.
/
buttons, set