Electrical Connection - Hkoenig CAVIST91 Manuel D'utilisation

After plugging the wine cooler into a wall outlet, turn the
unit on and allow the unit to cool down for 3 ~ 4 hours
under before placing wine bottles or beverages in the
appliance.

ELECTRICAL CONNECTION

Improper use of the grounded plug can result in the risk
of electrical shock. If the power cord is damaged, have it
replaced by an authorized service center.
This wine cooler should be properly grounded for your
safety. The power cord of this wine cooler is equipped with
a three-prong plug which mates with standard three prong
wall outlets to minimize the possibility of electrical shock.
Do not, under any circumstances, cut or remove the third
ground prong from the power cord supplied. This wine
cooler requires a standard 220~240 Volt A.C. /50Hz
electrical outlet with three-prong ground.
This wine cooler is not designed to be used with an inverter.
The cord should be secured behind the wine cooler and not
left exposed or dangling to prevent accidental injury.
Never unplug the wine cooler by pulling the power cord.
Always grip the plug firmly and pull straight out from the
receptacle.
Do not use an extension cord with this appliance. If the
power cord is too short, have a qualified electrician or
service technician install an outlet near the appliance.
Use of an extension cord can negatively affect the
performance of the unit.
If any problems with the wine cooler persist, please
contact our Customer Service Dept. to consult with a
representative at cavist.cav.ist or visit our website to
request warranty service at www.cav.ist