Publicité
8
STEP 5
MOUNTING THE BRACKET
Mount the Doorbell on a Wooden Surface
If you're mounting the doorbell on a wooden surface, you don't need to pre-
drill pilot holes. Use the provided screws to secure the mounting bracket on
the wall, the screw hole positioning card indicates the position of the screw
holes.
What you need: Screwdriver, Mounting Bracket, 15° Mounting Wedge
(Optional), Screw Packs
Mounting Bracket
Phillips-Head Screwdriver
(Attached to 15° Mounting
(not provided)
Wedge)
Wall
Mounting
Bracket
Without 15° Mounting Wedge
12 EN
15° Mounting
Screw Packs (Spare screws
Wedge (Optional)
and anchors are included.)
Mounting
Mounting
Wall
Wedge
Bracket
With 15° Mounting Wedge
Mount the Doorbell on Surfaces Made Out of
Hard Materials
1. If you're mounting the doorbell on a surface made out of hard materials,
like brick, concrete, stucco, drill 2 holes through the screw hold positioning
card with a 15/64"(6mm) drill bit.
2. Insert the provided anchors, and then use the provided long screws to
secure the mounting bracket on the wall.
What you need: Power Drill, 15/64"(6 mm) Drill Bit, Mounting Bracket,
15° Mounting Wedge (Optional), Screw Packs
Mounting Bracket
Power Drill
15/64"(6 mm) Drill
(Attached to 15°
(not provided)
Bit
Mounting Wedge)
1
Screw Packs (Spare screws
15° Mounting
and anchors are included.)
Wedge (Optional)
EN 13
Publicité
