Publicité
12
APPENDIX 3
POWERING THE DOORBELLWITH EXISTING DOORBELL WIRES
3.1 Verify whether the doorbell wires are working
1. Ring the existing doorbell to check if it is working. If the doorbell doesn't
ring, your doorbell wires may be defective. Power the doorbell on its own
battery or consult an electrician to fix the wires.
2. Shut off power at the breaker. Turn the lights on / off in your home to make
sure the electricity in your house is properly shut off.
OFF
OFF
Always be careful when handling wires. If you're not comfortable
installing it yourself, have a qualified electrician do it.
18 EN
3.2 Detach the Existing Doorbell Button
If you already have existing doorbell wiring:
1. Remove the existing doorbell button with a Phillips-head screwdriver (not
provided).
2. Pull the two wires out carefully when removing the existing doorbell.
Straighten the wire ends if necessary.
What you need: Philips-Head Screwdriver
Phillips-Head Screwdriver
(Not provided)
EN 19
Publicité
