13
NOTICE
This product complies with the radio interference requirements of the
European Community
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU.For the declaration of conformity, visit the Web site: https://
uk.eufylife.com/ .
The adapter shall be installed near the equipment and shall be easily accessible.
Do not use the Device in the environment at too high or too low temperature,
never expose the Device under strong sunshine or too wet environment.
T8213: The suitable temperature for the product and accessories is -20°C to
50°C.
T8010X: The suitable temperature for the product and accessories is -10°C to
45°C.
When charging, please place the device in an environment that has a normal
room temperature and good ventilation.
It is recommended to charge the device in an environment with a temperature
that ranges from 5°C~25°C.
Please ensure to use only the adapter offered by the manufacturer. Using
unauthorized charger may cause danger and violate the guarantee article.
This adapter is for indoor use only. The adapter type is KA2401A-1202000DE,
output voltage/current is 12Vdc/2A. The plug considered as disconnect device of
adapter.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS
26 EN
RF exposure information: The Maximum Permissible Exposure (MPE)
level has been calculated based on a distance of d=20 cm between the device
and the human body. To maintain compliance with RF exposure requirement, use
product that maintain a 20cm distance between the device and human body.
The Device T8213 Wifi Operating Frequency Range:2412~2472 MHz(2.4G);
Range:23-24 GHz(24GHz);
Wifi Max Output Power:17.88 dBm(ERIP for 2.4G); Max Output
Power:4.7dbm(EIRP for 24Ghz)
The Device T8010X Wifi Operating Frequency Range:2412~2472 MHz(2.4G);
Range:866-866.8 MHz(Sub-1G);
Wifi Max Output Power:18.40 dBm(ERIP for 2.4G); Max Output
Power:5.24dbm(EIRP for Sub-1G)
The following importer is the responsible party (contract for EU matters)
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich,
Germany
This product is designed and manufactured with high quality materials
and components, which can be recycled and reused.
This symbol means the product must not be discarded as household
waste, and should be delivered to an appropriate collection facility for
recycling. Proper disposal and recycling helps protect natural resources,
human health and the environment. For more information on disposal
and recycling of this product, contact your local municipality, disposal
service, or the shop where you bought this product.
This product complies with the radio interference requirements of the
United Kingdom
EN 27