Publicité
3.3 Find a Mounting Spot
1. When determining the mounting position of the doorbell, consider these
factors:
①
Check if you can reuse the existing holes and anchors on the wall or
door frame.
②
If you are drilling the mounting holes for the first time, the
recommended mounting height is 48" / 1.2 m from the ground.
③
To adjust the angel, use the 15° mounting wedge as a supplementary
mounting bracket.
1.76m(5'9")
1.2m (48")
1m
0.3m
Door
Video Doorbell
(40")
(12")
Without 15° Mounting wedge
2. Place the screw hole positioning card against the wall to mark the position.
20 EN
15°
Door
Video Doorbell
With 15° Mounting wedge
3.4 Mount the Bracket
If you're mounting the doorbell on a wooden surface, you don't need to pre-
drill pilot holes. Use the provided screws to secure the mounting bracket on
the wall. The screw hole positioning card indicates the position of the screw
holes.
What you need: Power Drill, Mounting Bracket, 15° Mounting Wedge
(Optional), Screw Packs
Mounting Bracket
Phillips-Head Screwdriver
(Attached to 15° Mounting
(Not provided)
Wedge)
Wall
Wall
Mounting
Bracket
Without 15° Mounting Wedge
Screw Packs (Spare screws
15° Mounting
and anchors are included.)
Wedge (Optional)
Mounting
Mounting
Wedge
Bracket
With 15° Mounting Wedge
EN 21
Publicité
