Ammann AVH 7010 Instructions De Service page 25

Serial No.
Fabr. No.
Service weight (kg)
Power output (kW)
Constr. year
AMMANN Verdichtung GmbH
D-53773 Hennef Made in Germany
MOTORENFABRIK HATZ KG
GmbH
+CO
D-94099 RUHSTORF
TYP KENNZ.
MOTOR/FABRIK. NO. ABE/AUSF.
MIN NH PV Cm³
1
MADE IN GERMANY
These instructions include:
•
Safety regulations
•
Operating instructions
•
Maintenance instructions
These instructions have been prepared for operation on the
construction site and for the maintenance engineer.
These instructions are intended to simplify operation of the
machine and to avoid malfunctions through improper operation.
Observing the maintenance instructions will increase the
reliability and service life of the machine when used on the
construction site and reduce repair costs and downtimes.
Always keep these instructions at the place of use of the
machine.
Only operate the machine as instructed and follow these
instructions.
Observe the safety regulations as well as the guidelines of
the civil engineering trade association „Safety rules for the
operation of road rollers and compactors" and the pertinent
regulations for the prevention of accidents.
Ammann Verdichtung GmbH is not liable for the function of the
machine when used in an improper manner and for other than the
intended purpose.
Operating errors, improper maintenance and the use of incorrect
operating materials are not covered by the warranty.
The above information does not extend the warranty and liability
conditions of business of Ammann Verdichtung GmbH.
We reserve us the right to take changings due to technical
development without announcement.
Please enter
(data on machine type plate)
Mach.-type :______________________
Mach.-No. :______________________
Engine-type :______________________
Engine-No. :______________________
Ammann Verdichtung GmbH
Josef-Dietzgen-Straße 36 • D-53773 Hennef / Postfach 11 63 • D-53758 Hennef
FAX +49 2242/8802-59 • FAX +49 2242/8802-89
Foreword
(Service)