Publicité
When the tumbler base gasket needs to be cleaned
Remove the tumbler base gasket from its base before cleaning.
Soak in warm water with diluted kitchen detergent. Wash it with a soft sponge,
rinse and dry them well. Attach it along the inboard edge of the tumbler base.
Detaching
Tumbler
base
gasket
Taking out from here
Using dishwasher and dish dryer
Safe
/ Unsafe
Lid gasket
(Black)
Lid
Opening cap
gasket(Gray)
Make sure to read the operating instructions of the dishwasher and dish dryer before
●
use. Make sure to use a detergent intended for use with a dishwasher.
Keep these items away from the heating element, and set temperature to low if using a
●
model with heat control.
Attaching
● Press the gasket firmly to prevent
the gap between the gasket and
the groove occurring or the gasket
bulge out.
Groove
[Cross section]
Tumbler
Tumbler base
Press down to the bottom
until there is no gap.
Tumbler base
gasket
Tumbler base
Motor
gasket(Gray)
housing
EN15
Publicité
