Publicité
Thank you for choosing this DÖRR product.
Please read the instruction manual and safety hints carefully before first use. Keep this instruction manual together with the device.
SAFETY HINTS
- Do not use or touch the device kit with wet hands.
- If the device is not in use for a longer period, please remove the batteries.
- Protect the device from rain, moisture and extreme temperatures.
- Do not use the device if it has been dropped. In this case a qualified electrician
should inspect the device before you use it again.
- If the device is damaged or if you notice a burnt smell: Interrupt the electronic
power supply by removing the batteries. Do not attempt to repair the device by
yourself. When service or repair is required, contact qualified service personnel.
- Never use aggressive cleansing agents or benzine to clean the device. We
recommend a soft microfiber cloth to clean the outer parts of the device.
- Store the device in a dust-free, dry and cool place.
- Keep away from children.
- DÖRR is not liable for damages caused by improper use or the failure to
observe the safety hints.
INTRODUCTION
The DÖRR DAF-320 is a system flash, which harmonizes with the functions of your Canon DSLR or system camera. Our intension is that by using the DAF-
320 you will achieve much better image results than with the use of the built-in camera flash or without flash. For an optimum use of the functions of your
new flash unit, please read these instructions before starting to work with the flash.
KEY FEATURES OF THE DÖRR DAF-320 FLASH
• ETTL Flash Control – the required flash power is calculated and set
automatically. Perfectly illuminated pictures are guaranteed.
• +/- Correction - for adaption to difficult light conditions
• Powerful Flash – guide no. 32; the flash ranges up to 15m (at ISO 400
and aperture setting F4.0)
• Manuel Power Setting– of great advantage for complex or creative
picture composing
• Remote Control and Slave Mode – allows the wireless use of the D-320
flash off camera – using TTL or manual flash control
• Flash Head can be bounced and tilted – for indirect flash ensuring softer
light characteristics
• Strobe Flash – for creative image effects
• LED Modelling Light – ensures precise autofocus even at low ambient
light
• Sleep Function – auto power saving mode
• Stable Metal Flash Head
• Overheating Protection
• LCD – displays all settings
GB INSTRUCTIONS FOR DÖRR DAF-320 TTL FLASH
CANON
BATTERY HINTS
Only use high-quality batteries of popular brands. When inserting the batteries,
please note correct polarity. Do not insert batteries of different types. Please
remove batteries when device is not in use for a longer period. Do not charge the
batteries - risk of explosion! In case of contact with battery acid rinse the affected
area immediately with water and contact a doctor. Do not dispose of batteries in
household waste.
NOMENCLATURE
1
Main & assist light switch
2
LC display
3
C2 button
Arrow key right
4
SET button
5
6
Clamp collar
7
Arrow key left
8
Flash ready indicator
9
MODE button
10
C1 button
Button for test flash and
11
strobe modelling light
2
12
Flash head
13
LED modelling light
14
Battery compartment
Unlock key for battery compartment
15
Locking pin
16
17
USB charging socket
18
Flash contacts
19
Wireless sensor
Publicité
