Publicité
LED ASSIST LIGHT FOR AUTOFOCUS
The DAF-320 flash is fitted with an autofocus assist LED light. In case of very low light, the contrasts of your object may be insufficient for proper auto-
focus. In this case, the autofocus assist LED will go on, when the camera shutter is pressed halfway down. So the object will be illuminated and even in
the darkest rooms, the autofocus will be able to work fast and precisely. Some cameras and certain settings will not support this function. Then the LED
assist light can be switched on by pressing the C2/Assist Light button once. By pressing it again, you can switch the LED assist light off.
STROBE ASSIST LIGHT
Press the flash button for 2 seconds. The strobe assist light will work for approx. 2 seconds.
OVERHEATING PROTECTION
The DAF-320 is fitted with an overheating protection. In case of permanent and highly frequent flash firing with minimum 1/4 flash power, the DAF-320 is
protected against damages caused by overheating. The flash will go off for approximate 2 minutes and a cooling mode starts. The LCD shows TP-HI.
SPECIFICATIONS
Flash Control
Guide no.
Wireless Flash
Information
Specific Functions
Tilt Angle
Bounce Angle
Flash Ready Indicator
AF Assist Light
Flash Recycling Time
Number of Flashes
Colour Temperature
ISO No
Test Flash
Slave Function
Strobe Function
Energy Source
USB Micro/Mini 5pin Socket
Weight
Measurements
Items in box
ATTENTION
Batteries are marked with the symbol of a crossed out bin. This symbol indicates that empty batteries or rechargeable batteries which can no longer be charged, should not be disposed of with household waste.
Waste batteries may contain harmful substances that can cause damage to health and to the environment. Please use the return and collection systems available in your country for the disposal of the waste batteries.
WEEE INFORMATION
The Waste Electrical and Electronic Equipment Directive (WEEE Directive) is the European community directive on waste electrical and electronic equipment, which became European law in February 2003.
The main purpose of this directive is to prevent electronic waste. Recycling and other forms of waste recovery should be encouraged to reduce waste. The symbol (trash can) on the product and on the packing
means that used electrical and electronic products should not be disposed of with general household waste. It is your responsibility to dispose of all your electronic or electrical waste at designated collection points.
Disposing of this product correctly will help to save valuable resources and it is a significant contribution to protect our environment as well as human health. For more information about the correct disposal of
electrical and electronic equipment, recycling and collection points please contact your local authorities, waste management companies, your retailer or the manufacturer of this device.
RoHS CONFORMITY
This product is compliant with the European directive 2011/65/EU of June 08, 2011 for the restriction of use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.
CE MARKING
The CE marking complies with the European directives.
GB INSTRUCTIONS FOR DÖRR DAF-320 TTL FLASH
ETTL auto flash or manual
32 / ISO 100
Wireless ETTL control, usable as Muster and
Remote flash
Illuminated LC Display
Flash on first and second curtain,
Flash Bracketing
-7° to 90°
150° (60° left, 90° right)
red LED on the rear side of flash housing
LED light
max. 5s with fresh batteries
100 – 1500 with fresh batteries
approx. 5.500 K
automatic match with camera
by pressing the flash button
incorporated photocell for 2 slave modes
number and frequency adjustable
2x 1,5V AA Mignon batteries or rechargeable
batteries of the same type
for battery charging (cable not included)
approx. 150g (w/o batteries)
110 x 65 x 35 mm
Flash, diffusor, case, stand, manual
CANON
Power Ratio Setting
1/1
Guide No.
32
Based on ISO 100, guide no. = aperture x distance in m
7
1/2
1/4
1/8
1/16
1/32
29,4
21,5
15,2
10,8
7,6
1/64
1/128
5,4
5,1
Publicité
