Télécharger Imprimer la page

CLAS PE 6102M Mode D'emploi page 12

Pont ciseaux mobile basse levee 230v 3t

Publicité

PE 6102M
MOBILE SCISSOR LIFT DUAL CYLINDER LOW RAISE 230V 3T
SAFETY INSTRUCTIONS
1. Do not install the lift on any asphalt surface
2. Read and understand all safety warning procedures before operating the lift.
3. Keep hands and feet away from any moving parts. Keep feet clear of lift when lowering.
4. The lift may only be used by qualified staff, properly trained for the specific use of the machine.
5. Do not wear unfit clothes such as large clothes with flounces, tires, etc, which could get caught
by moving parts of the machine.
6. The lift surrounding area must be free from people or objects which could be a danger for lifting
operations.
7. The lift is only designed to lift the entire body of vehicle, having maximum weight not more than
the lift capacity.
8. Always insure the safety devices are engaged before any attempt to work on or near vehicle.
9. Make sure that the machine and its devices are working correctly, according to the specific
instructions for maintenance.
10. Lower the lift to its lowest position when service finish.
11. Do not modify the machine without manufacturer's advice.
12. If the machine is not to be used any more, owners are suggested to make it unusable by
removing the power supply connections, emptying the oil tank and disposing the liquids by right
way.
13. If the lift is to be left unused for a long period, proceed as follows:
a. Disconnect the energy source;
b. Empty the control unit tank.
c. Grease the moving parts which might be damaged by dust or drying out.
INTRODUCTION
This guide has been made in order to supply the owner as well the user with the basic instructions
for a correct installation, operation and maintenance of the lift.
Read this guide carefully before using the machine and follow the instructions given by this guide
carefully to grant the machine a correct function, efficiency and a long service life..
Intended use
The lift has been designed and constructed for lifting vehicles with the sole purpose of performing
service, repairing and inspection. Any other use not described is to be considered as improper and
irrational, and thus it will be under the whole responsibility of the operator.
The middle rise scissor lift is mainly used for tire service or other quick service around vehicles.
This appliance must be only used for the purpose of which it is expressly designed. It is forbidden
to lift people or others not specified in this manual. Any other use is to be considered improper
and irrational and thus highly forbidden.
The constructor cannot be held responsibilities for any damage or injuries caused by an improper
use or by the non-observance of the following instructions:
Safety system
Pneumatic safety lock.

Publicité

loading