Publicité
4. BEFORE FIRST USE
EN
4.1. UNPACKING
■
Unpack the appliance and remove all packaging materials.
■
Check the appliance has no visible damage and no parts are missing.
■
Before using the appliance for the first time, or before using it after a period of prolonged
storage, clean the appliance and accessories, following the instructions in the CLEANING
AND CARE section.
4.2. ASSEMBLY
Check all parts are correctly assembled:
1.
Slot the drip tray with cover into position below the coffee outlet.
NOTE: The drip tray collects water from the coffee outlet during each rinse and auto clean,
as well as excess coffee that may drip after brewing. Therefore, empty the drip tray daily.
2.
Make sure the coffee grinder inside the coffee bean tray is correctly installed and that the
coffee bean tray lid is placed on top of the coffee bean tray.
3.
Open the door to check that the coffee grinds bin is horizontally placed on top of the coffee
grinds drip tray inside the coffee machine. If the warning indicator
parts is incorrectly assembled. Remove and reassemble until the warning indicator light
turns off.
4.
The steam wand is in place under the steam handle. Simply pull off to remove and push on
to attach the steam wand in a vertical position.
5.
The brewing capsule must be firmly fixed into place. If the warning indicator
constantly, the brewing capsule is incorrectly assembled.
■ To remove, press the two orange clips together and pull it out.
■ To install, align the arrow on the brewing capsule with the arrow on the bracket that holds
the brewing capsule into place. Push the brewing capsule into the slot until it firmly clicks
into place.
6.
If the coffee bean grinder has been removed for cleaning, check that it is correctly installed
( CLEANING THE COFFEE BEAN GRINDER).
5. OPERATION
Place the coffee machine on a flat, level, and dry surface.
5.1. FILLING THE WATER TANK
■
Turn off the appliance.
■
Lift up the water tank and remove it from the appliance.
■
Push the water tank lid open.
Rinse and fill the water tank with drinking water up to the MAX level mark and close the lid.
■
The water level should not exceed the MAX level mark.
■
If there is insufficient water in the coffee machine, the refill water tank indicator light
on and the hot water button indicator light flashes. Fill the water tank immediately.
■
The water tank can also be filled with a jug without removing it from the appliance.
■
To reattach the water tank, slot the water tank back onto the machine.
5.2. FILLING THE COFFEE BEAN TRAY
■
Lift the coffee bean tray cover off.
■
Turn the grinder setting dial clockwise or anticlockwise and line up your chosen setting with
the arrow (1 = finest grinding setting and 15 = coarsest grinding setting). We recommend
using the grinding setting 8 or higher to begin with and then adjust to suit your preferences.
■
Fill with coffee beans up to a maximum of 200 g.
■
Put the coffee bean tray cover back on the appliance.
■
The empty coffee bean indicator
empty. Refill the coffee bean tray and the indicator light will turn off.
illuminates constantly when the coffee bean tray is
8
flashes, one of these
lights up
turns
Publicité
