Publicité
VHC110 - VHC120
Vacuum Cleaner Parts and Labels
Identi昀椀cation plate which includes:
1.
Model code, serial number, EC marking, year of
manufacture, weight (kg)
2.
Dust container
3.
Dust container release lever
4.
Inlet
5.
Air outlet.
6.
Castor locking lever.
7.
Handle.
8.
Closing band lever.
9.
Mechanical stop for liquids (L version).
10. Container for liquids (L version).
11. Inlet of the container for liquids (L version).
12. Plug for closing the side container (L version).
13. Warning plate.
Draws the operator's attention to the fact that the 昀椀lter
must only be shaken when the vacuum cleaner is turned
OFF (see also par. "Primary 昀椀lter shaker").
14. On/o昀昀 valve.
This vacuum cleaner creates a strong air 昀氀ow which is drawn
in through the inlet (4) and blows out through the outlet (5).
Before turning on the vacuum cleaner, 昀椀t the vacuum hose
into the inlet and then 昀椀t the required tool on to the end part
(refer to the manufacturer's accessory catalogue or Service
Centre).
The diameters of the authorized hoses are indicated in the
Technical data table.
The vacuum cleaner is equipped with a main 昀椀lter which
enables it to be used for the majority of applications.
In addition to the primary 昀椀lter that retains the most common
dust, a secondary 昀椀lter (absolute 昀椀lter) can be installed.
I
GB
E
E
C447
Vacuum cleaner description
Figure 1
Optional kits
1.
Grill and depressor
2.
Grille and valve
3.
Immersion Separator
4.
Liquids
5.
Pressure governor
Please contact the manufacturer's sales network for
information on other optional kits.
Instructions for installing the optional are included in the
conversion kit.
WARNING!
Use only genuine optional kits supplied and author-
ized by the manufacturer.
Optional kits must be installed by quali昀椀ed Nil昀椀sk
personnel.
Accessories
Various accessories are available; refer to the manufacturer's
accessory catalogue.
WARNING!
Use only genuine accessories supplied and authorised
by the manufacturer.
Packing and unpacking
Dispose of the packing materials in compliance with the laws
in force.
MODEL
Standard deck
Stainless steel
deck
(*) Weight with packing
Unpacking, moving, use and storage
Operate on 昀氀at, horizontal surfaces.
The load-bearing capacity of the surface the vacuum cleaner
is placed on must be suitable for bearing its weight).
4
Figure 2
A
B
C
kg (*)
mm
mm
mm
700
790
1500
700
790
1500
08/2018
53
53
Publicité
