Publicité
NOTE: At no time should the logs impinge or go across the fl ames.
A
1.
Remove stud C. Then place log #1 fl at in front
of the media barrier on studs A and B.
note:
For ease of installation, place some of the lava rock/
charcoal (supplied) around the rear logs, covering the
media tray (not illustrated). Ensure the lava rock does
not cover the burner and air intake areas.
3
3.
Place log #5 on the front left side of the media
tray with the charred end facing outwards.
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada
1
B
C
1
5
3
2.
Place log #3 on the left side of the media tray.
Place the small end on log #1 and the opposite
end on the left front side of the media tray.
3
4.
Place log #4 on the front right side of the media
tray with the charred end facing outwards.
note:
Place any remaining lava rock/charcoal (supplied)
around the logs, covering the media tray (not illustrat-
ed). Ensure the lava rock does not cover the burner
and air intake areas.
• 1(866)820-8686
1
1
4
W415-3063 / 01.28.22
• www.napoleon.com
Publicité
