Publicité
Temperature Guide
Wash Temp
HOT
WARM
COLD
In wash water temperatures colder than 60°F (15.6°C), detergents
do not dissolve well. Soils may be difficult to remove.
Controlled Temperature
Warm and cold wash temperatures are sensed and maintained by
regulating the amount of hot and cold water from your faucet. This
provided excellent cleaning while saving energy.
ATC (Auto Temp Control) electronically senses and maintains a
uniform water temperature. ATC regulates incoming hot and cold
water.
■
Cold rinse is not controlled and will be the same as your cold
faucet.
Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these washer
cycles.
CYCLE
SUGGESTED LOAD TYPE
Power Wash
Soiled garments and household items
Whites
Soiled white fabrics
Heavy Duty
Heavily soiled underwear, towels, shirts, etc.,
made of cotton
Normal
Normally soiled blouses, shirts, overalls, etc., made
of polyester, nylon, cotton, linen, or cotton blends
Comforters
Normally soiled blankets and comforters
Rapid Wash
Small loads of 2-3 lightly soiled cotton, polyester,
nylon, and cotton blends.
Delicate
Curtains and delicate clothing, dresses, skirts, shirts,
and blouses.
Silk
Silk or ultra delicate fabrics labeled as machine
washable
Rinse,
All loads
Drain & Spin
Soak
Fabrics made of cotton, linen, polyester, or nylon
Clean Washer with
No clothes, use AFFRESH
AFFRESH™
or chlorine bleach
16
Suggested Fabrics
Whites and pastels
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed or fade
Light soils
Laundry Guide
washer cleaner tablet
®
Spin Speed
Each cycle has a preset spin speed. To change the spin speed, press
the SPIN SPEED button until the desired setting is illuminated.
Cycle Signal
This signal is helpful when you are removing items from the washer
as soon as it stops. Press Cycle Signal button Signal On or Signal
Off.
Prewash
Use this option for loads of heavily soiled items that need
pretreatment.
■
Add detergent to Main Wash compartment of the dispenser
drawer.
■
This option adds tumbling time prior to the selected main cycle.
The washer continues automatically from prewash into the main
wash cycle.
Stain Treat
Use this option for heavily soiled loads that need improved stain
treatment. When Stain Treat is selected, the water temperature of
the selected wash cycle is automatically set to warm and provides
additional time of medium and high speed tumbling. This option
will provide optimal removal of organic stains such as blood.
AVAILABLE OPTIONS
Delay
2nd
Start
Rinse
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Cycle
Fresh
Prewash
Signal
Spin™
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Stain
Treat
✔
✔
✔
Publicité
