Bench Alignment; Static Alignment; Dynamic Alignment - endolite Multiflex SE Instructions D'utilisation

6 Bench Alignment

½
*
1/3
Approx.
Build
Line
½


2/3
Align trans-femoral devices according to fitting
instructions supplied with the knee, keeping
the build line relative to the Multiflex ankle, as
shown.

Static Alignment

With flexion accommodated the build line
should pass through the center of the socket
in the sagittal (A–P) plane and through the
Multiflex SE foot, as shown. Heel height of the
shoe should be accommodated.

Dynamic Alignment

Coronal Plane
Ensure that M–L thrust is minimal by adjusting
the relative positions of the socket and foot.
Sagittal Plane
Check for smooth transition from heel strike
to toe-off. Ensure that when standing the heel
and toe are evenly loaded and that both are
touching the floor.
Check that the serrations are engaged
before tightening the foot bolt.
*
Allow for users
own footwear.
4
938211/6-0117