Bench Alignment - endolite Esprit ESP22L1S Instructions D'utilisation

6 Bench Alignment

½
*
Approx. 1/3
Build
Line
½
0-10 mm
2/3
Static alignment
Setup length
With flexion, adduction and abduction
properly accommodated, set the limb length
5 mm longer than the sound side to allow for
compression and deflection of the foot springs
during gait. This should be re-assessed once
the dynamic trial commences and the length
adjusted accordingly.
Load line
This should fall between the centre line of the
pyramid and 10 mm anterior (with heel height
properly accommodated). The socket should
be positioned accordingly.
Dynamic alignment
Coronal plane
Ensure that M-L thrust is minimal by adjusting
relative positions of socket and foot.
Sagital plane
Check for smooth transition from heel strike to
toe-off. Ensure also that when standing the
heel and toe are evenly loaded and that both
are touching the floor.
Transfemoral alignment
Align transfemoral components according to
fitting instructions supplied with the knee,
keeping the build line relative to this device as
shown.
*
Allow for users
own footwear
4
938264S/2-0718