Empire Comfort Systems Mantis FW28BMN-2 Manuel Du Propriétaire page 10

Removing the Filter - Bay Window Mantis Models
The filter is located in the front of the heater, and this should be
cleaned and checked once a month.
To remove the filter from the heater, remove the louvered panel.
The filter is secured to the panel by a filter rod. Remove the filter
rod, then remove the filter.
The filter can be rinsed with water to remove any dirt and debris.
The filter can be dried with a soft towel and inserted back into the
heater.
To reinstall the filter, place filter into louvered panel, reinsert the
filter rod, then reattach the louvered panel to the heater.
27298-0-0810
Removing the Filter - Fireplace Mantis Models
The filter is located in the front of the heater, and this should be
cleaned and checked once a month.
To remove the filter from the heater, remove the lower louvered
panel by lifting up, then pulling out.
The filter is secured to the panel by a filter rod. Remove the filter
rod, then remove the filter.
The filter can be rinsed with water to remove any dirt and debris.
The filter can be dried with a soft towel and inserted back into the
heater.
To reinstall the filter, place filter into the louvered panel, reinsert
the filter rod, then reattach the louvered panel to the heater.
Page 9