Publicité
1) Setting up
Open the lid.
Check that the pan support attachments are
correctly positioned in their housings.
Check that the attachments of the cooking
plate are correctly positioned in their housings.
2) Lighting
- Open the gas supply (valve or lever on
regulator).
- Rotate the knob corresponding to the
burner anti-clockwise to the maximum flow
rate position (
).
- Wait for 2 to 3 seconds and press the
corresponding piezoelectric button (
several times until the burner lights. If it
does not light after 3 tries, position the
adjusting knob to "OFF" (
it clockwise. Wait for 1 minute before
repeating the operation.
The left button allows the ignition of the
2 stove burners (left and right), the right
button allows the ignition of the grill/toaster.
- If the piezo ignition doesn't work, present a
flame close to the burner.
- Adjust the flame to the container dimension
by positioning the knob to the defined range
between (
) and ( ).
- If you want to perfect the simmering
temperature, adjust the flame power by
positioning the knob on the defined range
between (
) and (
- In the event of a strong wind orient the
appliance - back facing the wind - so that
the wind does not deviate the burner flame
outside the base of the saucepan.
- When cooking is finished turn the knob
corresponding to the burner clockwise to
•
position (
).
3) Cooking
a) Stove
)
Place a cooking vessel (frying pan, pan...) on
the pan support, centered over the burner.
- 13 -
•
) by rotating
•
).
GB
Publicité
