Functional Description - Abicor Binzel MT Série Mode D'emploi

MT/AUT/AUT RAB

5 Functional description

The functioning welding torch system MIG/MAG comprises the following components:
• Torch neck with equipment parts and parts subject to wear, Handle tube, Hose assembly
including central plug
All elements together form an operating unit which provides an arc for welding when supplied
with the appropriate operating resources. The welding wire required for welding is fed by the
welding torch system all the way to the contact tip. The contact tip transmits the welding current
to the welding wire, producing an arc between the welding wire and work-piece. The light arc
and the molten pool are protected by the inert gas (MIG) and the active gas (MAG).
6 Commissioning
DANGER
Risk of injury due to unexpected start-up
The following instructions must be followed during all maintenance, servicing, assembly,
disassembly, and repair work:
• Switch off the power supply.
• Close the gas supply.
• Close the coolant supply.
• Cut off the compressed air supply.
• Disconnect all electrical connections.
DANGER
Risk of injury and machine damage when handled by unauthorized persons
Incorrect repair work and changes of the product may lead to significant injuries and
damage to the device. The product warranty will be rendered invalid if work is carried out on
the product by unauthorized persons.
• Operating, maintenance, cleaning and repair work may be carried out only by qualified
personnel (in Germany see TRBS 1203).
NOTICE
• Please take note of the following instructions:
 3 Product description on page EN-5
BAL.0193.0 • 2018-07-31
5 Functional description
EN - 9