Publicité
TFA_No. 30.3907_Anleitung
TFA-ID transmitter ID-A5 POOL – Transmitter pool thermometer
• Batteries must not be thrown into a fire, short-circuited, taken apart or
recharged. Risk of explosion!
• Low batteries should be changed as soon as possible to prevent damage
caused by leaking. Make sure the polarities are correct. Never use a combina-
tion of old and new batteries together, nor batteries of different types.
Remove the batteries if the device will not be used for an extended period of
time. Avoid contact with skin, eyes and mucous membranes when handling
leaking batteries. In case of contact, immediately rinse the affected areas with
water and consult a doctor.
CAUTION
• Unauthorised repairs, alterations or changes to the product are prohibited.
• Do not expose the device to extreme temperatures, vibrations or shocks.
• Clean the device with a soft damp cloth. Do not use solvents or scouring
agents.
• Attention: Close the screw cover carefully, so that no water can penetrate the
device.
• When water freezes remove the thermometer.
5. Elements
A: Display (Fig. 1):
A 1:
Transmission symbol
A 3:
Battery symbol
B: Housing (Fig. 1+2):
B 1:
Eyelet for cord
B 3:
Screw cover
B 5:
TFA-ID ID-Code
6. Getting the pool sensor started
• Turn the screw cover counterclockwise and remove it.
• Carefully pull the battery container out of the body as far as it will go and
insert 2 x AA 1.5 V batteries with the correct polarity.
• The transmitter has its own ID number (nine digits, alphanumeric). A sticker
with the TFA-ID number is attached to the outside of the battery container.
Make a note of the 9-digit ID number.
16
31.10.2024
15:51 Uhr
Seite 9
A 2:
Water temperature
B 2:
Sensor
B 4:
Battery container
B 6:
Sealing ring
TFA-ID transmitter ID-A5 POOL – Transmitter pool thermometer
• Push the battery container back into the housing.
• Screw the cover back on carefully Pay attention to the sealing ring.
• After inserting the batteries, all segments are briefly shown on the display of
the transmitter, then a version info and the flashing ID number (three digits
each in succession). After that the actual measured temperature appears.
7. Add the transmitter to a TFA.me station and/or the TFA.me portal
• Take the base station/gateway into operation according to the instruction
manual of the device and register on the TFA.me portal go.tfa.me if you have
not already done so.
• The reception and forwarding of the measured values of the TFA-ID transmit-
ter to the TFA.me system takes place automatically if a TFA.me station/gate-
way is within reception range. If the measured values of the TFA-ID transmit-
ter should be shown on the display of the TFA.me station (max. 5 depending
on the model), you can use the manual transmitter search function (as
described in the instructions for TFA.me station/gateway).
• Add the pool sensor in the TFA.me portal. Click on the 'Add device' option in
the navigation menu at the top left and enter the 9-digit ID number of the pool
sensor (sticker on the battery container).
• If the device has been successfully added, it will be displayed in the overview
from now on.
• Now place the device at your chosen location.
8. Positioning of the pool sensor
• The pool sensor floats on the water surface and measures the temperature in a
water depth of about 110 mm. You can fix the pool sensor by a cord. Pull the
cord through the eyelet.
• Check whether a reliable transmission from the transmitter to the TFA.me sta-
tion/gateway is possible (transmission range of up to 100 m).
• Keep a distance of at least 2 metres to possibly interfering sources (TV, com-
puter, microwave, wireless phones, baby monitors) and large metal objects
(e.g. refrigerator). Within solid walls, especially ones with metal parts, the
transmission range can be reduced considerably.
9. Battery replacement
• As soon as the battery symbol appears on the display or in the device infor-
mation on the TFA.me portal, please change the batteries of the pool sensor.
17
Publicité
