Télécharger Imprimer la page

Beko BHCA62442BBH Manuel D'utilisation page 14

Masquer les pouces Voir aussi pour BHCA62442BBH:

Publicité

4 First Use
Before you start using your product, it is
recommended to do the following stated in
the following sections respectively.
4.1 Initial Cleaning
1. Remove all packaging materials.
5 Using the Hood
The hood has an engine with various
speeds. For a good performance, we re-
commend using low speeds under normal
conditions and high speeds in case of
strong odour and vapour condensation.
The program is cancelled if power
is cut when any program in your
hood is active.
1
Lamp key
2
On-Off/Speed 1 key
3
Speed 2 key
4
Speed 3 key
Operating the hood
1. Touch the speed level key you have se-
lected to operate the hood.
ð The set speed level key lights up.
2. You can touch the other speed level
keys to change the speed level.
When in operation, the product will
run for a maximum of 6 hours if no
key is touched.
Turning off the hood
1. To turn the hood off, touch again the
key of the level on which the hood is
operating or
key.
2. Wipe the surfaces of the product with a
wet cloth or sponge and dry with a
cloth.
NOTICE: Some detergents or cleaning
agents may cause damage to the surface.
Do not use abrasive detergents, cleaning
powders, cleaning creams or sharp objects
during cleaning.
If you touch the
function active except the lamp,
then the function is cancelled.
Operating the lamp
1. Touch the
The illumination lamps operate for
a maximum of 12 hours.
Turning off the lamp
1. You can turn it off by touching the
key again.
Aluminium filter fill warning
The light of Speed 2 key flashes for thirty
seconds after every 100 hours of opera-
tion. Clean the aluminium filters. After
cleaning, the lamp warning of Speed 2 key
does not turn off automatically. This
product continues to show the 30-second
warning when the product switches off
after every operation. When you touch the
Speed 2 key for more than 3 seconds, alu-
minium filter fill warning is reset and the
lamp is turned off.
The warning is not cancelled if the
power is cut when the hood gives
aluminium filter fill warning. When
the power is available, it continues
to warn with the light of Speed 2
key flashing.
EN / 14
key with any
key to operate the lamp.
EN
DE
FR
ET

Publicité

loading