Publicité
Cleaning the lid
•
Remove the bowl lid from the machine.
•
Clean the surface using a damp cloth and /
or a non-abrasive sponge soaked in sanitising
product.
•
Rinse thoroughly using clean water.
Emptying the boiler Tank
Warning: While the boiler is
being emptied, the machine
must be unplugged. The boiler
may be emptied only when the
bowl is empty and the machine
has cooled down sufficiently.
•
Remove the drip tray.
•
Remove the lid (A) (Fig 31).
•
Place the machine on a flat surface.
•
Place a container (B) with a capacity of more
than 3 litres underneath the bleeder cap (C)
(Fig 32).
•
Use a coin or Allen wrench to unscrew the
drain cap (C).
•
Pull out the cap (C) with a firm movement and
wait for all the water to empty out from the
boiler tank (Fig 32).
CN219_ML_A5_v4_20241030.indb 9
CN219_ML_A5_v4_20241030.indb 9
Cleaning and de-scaling the Boiler
Tank
Warning: The boiler tank needs
to be de-scaled on a regular
basis.
•
Follow the steps for draining out the boiler
tank.
•
Insert and secure the boiler tank bleeder cap.
•
Fill the boiler tank with a solution of scale
remover (suitable for use in coffee machines)
and water (following instructions supplied with
the scale remover).
•
Leave the solution in the tank for the time
indicated in the scale remover instructions.
•
Empty out the solution from inside the boiler
tank.
•
Rinse out the tank as per scale remover
instructions.
Thermal Protector Switch
If the Boiler tank boils dry, the unit's thermal
protector switch will activate to protect the heating
element. Allow to cool then reset as follows:
•
Use a suitable tool to loosen and remove the
protective screw (A).
•
Use a suitable tool to press the button inside to
restore normal machine operation.
EN
9
2024/10/30 15:28
2024/10/30 15:28
Publicité
