Publicité
Cleaning the Water Pan
With bowl and tap removed clean the surface of
the pan using a damp cloth and/or a non-abrasive
sponge (Fig 19).
•
Clean the channel connecting the bowl and the
tap, using a cleaning brush (included) (fig 20).
•
Refit the tap.
•
Pour a little water inside the pan (Fig 21).
•
Use the tap to drain out all water from the pan
so as to eliminate any small product residues
inside the dispensing channel.
CN219_ML_A5_v4_20241030.indb 7
CN219_ML_A5_v4_20241030.indb 7
Disassembling and cleaning the tap
To clean the inside of the tap, disassemble it as
follows:
•
Remove the tap (See "removing the tap").
•
Place the tap on a clean, flat surface.
•
Loosen and remove the screw (A).
•
Slide out the pin (B) and spring (C) from the
seating (Fig 22).
•
Pull the lever (D) all the way out from the
knob(E) then push the lever(F) upwards from
bottom until it comes out from the pin guide
(Fig 23). Unscrew the knob E by turning anti-
clockwise while holding the rod in place.
•
Pull out the rod (G) and spring (H) from the
tap body (the pin/gasket assembly (I) will slide
out together with the rod) (Fig 24).
EN
7
2024/10/30 15:28
2024/10/30 15:28
Publicité
