Publicité
EN
•
Slide the mixing rod upwards with one hand,
taking care to grip it by the rotation pin
(Fig 15).
•
Place the bowl on a flat surface and using both
hands, remove the gasket by sliding it upwards
in the direction shown by the arrow (Fig 16).
•
Wash the disassembled bowl and components
with a sanitising detergent solution, rinsing
thoroughly with clean hot water.
•
Before reassembling the bowl ensure the
gasket seal is positioned correctly (Fig 16a,
16b).
6
CN219_ML_A5_v4_20241030.indb 6
CN219_ML_A5_v4_20241030.indb 6
•
Moisten the gasket seal with water and fit
the bowl back into place. DO NOT USE
LUBRICANT.
Warning: make sure that the
bowl is correctly fitted to the
machine; an incorrectly fitted
bowl will cause the product to
leak out with risk of scalding!
•
Reassemble the bowl, rod and mixing paddle
by reversing the disassembly instructions.
Removing the tap
•
Ensure the bowl is empty.
•
Move the tap rod to the maximum dispensing
position (Fig 17).
•
Press the button (A) securing the tap to the
machine and then remove the tap with both
hands (Fig 18).
2024/10/30 15:28
2024/10/30 15:28
Publicité
