Télécharger Imprimer la page

Buffalo CN219 Mode D'emploi page 10

Masquer les pouces Voir aussi pour CN219:

Publicité

EN
Troubleshooting
A qualified technician must carry out repairs if required.
Fault
The appliance is
The unit is not switched on
not working
Plug or lead is damaged
Fuse in the plug has blown
Mains power supply fault
Mixing paddle
No power
does not turn
Mixing rod not fitted correctly
Motor Fault
Switch set to OFF
Tap leaks
Tap not fitted correctly
Build up of debris
Sealing Gasket needs replacing
Water escaping
Temperature too high
from boiler
Tank filled above MAX indication
line
Sealing gasket needs replacing
Product leaks
The bowl is not fitted correctly
from bottom of
bowl
Sealing gasket needs replacing
Machine shuts
The water level in the boiler tank
down while in
has fallen below the minimum
use
(MIN) level
No water in boiler tank
No power
Thermal cut-out switch is activated
If the machine malfunctions due to causes other than those listed or the proposed
corrective actions do not solve the problem please call a BUFFALO agent or qualified
technician.
Technical Specifications
Note: Due to our continuous improvement process, the product specifications are subject to change
without notice.
Model
Voltage
CN219
220-240V~,
50/60Hz
10
CN219_ML_A5_v4_20241030.indb 10
CN219_ML_A5_v4_20241030.indb 10
Probable Cause
Power
Current
1000W
4.37A
Solution
Check unit is plugged in correctly and switched
on
Replace plug or lead
Replace the fuse
Check mains power supply
Make sure the machine is plugged in correctly
Ensure mixing rod is correctly fitted
Consult a qualified technician
Set the switch to ON
Empty machine and fit tap as per instructions
Empty machine and clean tap as per
instructions
Consult a qualified technician
Adjust the thermostat
Allow machine to cool then empty the tank and
refill to correct level
Consult a qualified technician
Empty machine and re-fit bowl as per
instructions
Consult a qualified technician
Fill the boiler tank to MAX fill level and reset
Thermal Protector Switch
Fill the boiler tank to MAX fill level and reset
Thermal Protector Switch
Check the appliance is safe with no obvious
damage then press the reset switch
Capacity
Dimensions
(Litres)
H x W x D mm
5
465 x 280 x 410
Weight
7.3kg
2024/10/30 15:28
2024/10/30 15:28

Publicité

loading