FLAEM AirMate Mode D'emploi page 18

TECHNICAL SPECIFICATIONS OF DEVICE
Model: P0504EM F400 combined RF8-3
Operating pressure (with neb.):
(1) Release:
MMAD:
(2)
(2) Respirable fraction < 5 μm (FPF)
(1) Data collected according to Flaem's internal procedure.
(2) In vitro characterisation performed by TÜV Rheinland Italia S.r.l. in cooperation with the University of Parma. More
details are available on request.
APPLIED PARTS
Type BF applied parts are:
Weight:
ENVIRONMENTAL CONDITIONS
Operating conditions:
Ambient temperature
Relative air humidity
Atmospheric pressure
Storage and transport conditions:
Ambient temperature
Relative air humidity
Atmospheric pressure
DURATION
Model: P0504EM F400
Service life 400 hours.
(Compressor unit)
The expected average life is 1 year, however it is advisable to replace the
Model: RF8-3
nebuliser every 6 months during intensive use (or sooner if the nebulis-
(Nebuliser and accessories)
er is clogged) to ensure maximum therapeutic e ectiveness.
EQUIPMENT AND MATERIAL INFORMATION
The equipment includes:
Compressor unit - Model: P0504EM F400
A1 - Switch
A2 - Air intake
A -
A3 - Air lter
A4 - Nebuliser holder
A5 - Carrying handle
A6 - Power cable
Nebuliser and accessories - Model: RF8-3
B1 -Connecting tube (compressor/nebuliser unit)
B2 - RF8 Dual Speed Nebuliser
B2.1 - Lower part
B -
B2.2 - Upper part with selector
B2.2.1 - Upper part
B2.2.2 - Selector switch support
B2.2.3 - Speed selector
B3 - Mouthpiece
0.8 bar.
Speed selector B2.2.3
in pos Max
0.40 ml/min approx.
4.48 μm
:
55.5%
patient accessories (B3, B4, B5, B6)
1.500 Kg
Between +10°C and +40°C
Between 10% and 95%
Between 69 KPa and 106 KPa
Between -25°C and +70°C
Between 10% and 95%
Between 69 KPa and 106 KPa
18
in pos Min
0.19 ml/min approx.
4.01 μm
61.1%
Information on materials
Polypropylene