Publicité
( 2 ) Preprogram functions
The unit can be linked together as master/slave in daisy chain in linkage as many
units as required and run by built in preprogrammed chase sequences triggered by music.
2-light show
＊
Dipswitch 10 "off" means the unit works normally and "on" means inversion. In order to creating a
great light show, you can set dip switch 10 "on" on any unit that is linking to the master unit to
get contrast movement to each other, even if you have two units only. Dipswitch 10 on the first
unit is no use in the DMX linking, as it is the master unit that operates the light show.
( 3 ) By easy controller
The easy remote control is used only in master/slave mode. By connecting to the 1/4" microphone jack
of the first unit, you will find that the remote control on the first unit will control all the other units for
Stand by, Strobe/Next and Fast/Slow function.
1. STAND BY - To blackout all the units.
2. FUNCTION - STROBE/NEXT
- Under FAST ( LED off )mode, the units will strobe in three different ways:
a) Strobe in different gobos and colors.
b) Synchronous strobe in white color.
c) Two-light strobe in white color.
- Under SLOW ( LED on ) mode, press FUNCTION button to choose desired
color and gobo. It will change ten colors and then change one gobo.
3. MODE - FAST/SLOW
When the LED is off, it is in FAST mode. The unit's movement- Pan/Tilt & Gobo/Color is sound
activated. If the LED on, it is in SLOW mode, Pan/Tilt is sound activated but Gobo/Color wheel are
static, controlled by Next button.
Not need to set the dipswitches in master/slave mode.
Distributeur :
Page 14
Publicité
