Publicité
HID 200 Lamp Installation Or Replacement
Always switch power off before installing or replacing the lamp. Never try to replace the lamp
when it is hot.
Do not touch the bulb with bare hands. Cleaning the lamp with denatured alcohol and wipe with a
lint free cloth when lamp is dirty.
Loose the screw on the housing cover.
Loose the screws of the lamp wire from terminator
Remove the old lamp from the fixture.
Please be care to install the lamp into case, make sure it wedge tightly that it can not move easily.
WARNING: impropriety install will cause the lamp lifespan shorten and maybe explosion during
operation.
Connect the lamp wire to the terminator as before.
Please reinstall step 2 and step
Distributeur :
Page 11
Publicité
