Publicité
GB
Device sharing:
– Enter the device operation interface. Click the
"more" interface in the upper right corner and click
the Shared device.
– click on "add sharing", enter the new member's cell
phone number, click "finish", add complete, click on
add "please" to return to the left upper corner of the
Shared interface equipment sharing interface, and
then click "more" "please" to return to the left upper
corner of the interface equipment operation interface.
Cancellation of device sharing
– Open the "Smart life" software and enter the "Per-
sonal Center" to click Device Sharing;
– Delete the phone numbers of shared members to
cancel the device sharing.
WIFI address replacement:
• Remove the device on mobile phone:
– Open the "Smart life" software to enter my device;
– Click the device that needs to replace WIFI
address to enter the device operation interface;
– Click the "..." on top right of the operation interface;
– Click Remove Device and click OK to remove
the device;
– Manually remove device: Press SET button for
5 seconds to remove the device directly;
• Add Device:
– Placing devices in a new wireless LAN environment;
– Turn on the side mechanical switch of the product,
and the indicator light of WIFI symbol flashes.
– Long press the WIFI symbol key for 5 seconds,
the WIFI symbol indicator light is on and enters
the flash state;
– Open the "Smart life" software on the phone, enter
the phone number and obtain the verification code;
– Enter the verification code and click login.
– Click add device, select wireless LAN, input
WIFI password, click ok and connect the device;
– When the display of mobile phone interface is
successfully added, the device WIFI indicator
icon stops flashing and becomes long and
bright, then the addition is completed.
Modify device name
– Click the device that needs to be modified to enter
the device operation interface.
– Click the "..." on the upper right corner of the oper-
ation interface, and then click Modify Device Name.
– Click Modify Device Name, and input the location
to distinguish the devices or other name. Click
Save, and then the modification is successful.
Fault/malfunction
Device does not heat.
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
26
Troubles shooting
If your heater fails to operate, please follow these
instructions:
• Ensure that your circuit breaker or fuse is working
• Be sure the heater is plugged in and that the elec-
• If the ON/OFF switch is not illuminated at ON
Cleaning
– Before cleaning your heater, switch off the heater
Storage, transportation
Storage
– For short term storage, just plug off the heater and
Transportation
– When dispatching, try to use the original packag-
Faults and remedial measures
When something isn't working...
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Cause
Is the device switched off?
No mains voltage?
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Note: If you want to leave it not working for
a long time, please unplug the heater.
properly.
trical outlet is working properly.
position, send it to service center for reparation
directly.
DANGER! Risk of injury! Before all work on
the device, always disconnect the mains plug.
and allow it to cool. Disconnect the electricity sup-
ply to the appliance. The outside can be cleaned
by wiping it over with a soft damp cloth and then
dried. Do not use abrasive cleaning powders or
furniture polish, as this can damage the surface
finish. To release the heater from the wall, for
cleaning or redecoration, just open the screw bolt
cap and unscrew the bolts to take off from the
wall.
leave it away; for long term storage, you can dis-
mantle from the wall or cover it with some material.
ing, if possible.
DANGER! Risk of injury! Improperly per-
formed repairs can lead to the device not
functioning safely. This endangers yourself
and your environment.
Remedial measure
Switch on the device.
Check cables, plugs, outlets and fuse.
Publicité
