Publicité
temperature 37 °C or the previous setting temper-
ature, the heating indicator is on and the product
enters the heating state.
3. Wifi switch button: Hold down the "Wifi Switch button"
for 6 seconds. The "Wifi symbol" in the upper right cor-
ner of the LCD changes from the factory default "flash
state" to "slow flash state". Hold down the "Wifi Switch
button" for 6 seconds. The "Wifi symbol" in the upper
right corner of the LCD changes from "blinking at long
intervals" to "blinking at short intervals". (Quick flash
for 6 times/second, slow flash for 6 seconds/time)
4. Temperature setting: Touch the "power button",
the LCD screen lights up, and the middle temper-
ature of the LCD screen shows the ambient tem-
perature. At this time, press the "+" or "-" key, the
middle temperature of the LCD screen shows the
setting temperature and flash, press the "+" or "-"
key again to set the temperature, and do not oper-
ate 5 seconds after the temperature setting is
completed, the setting will be automatically saved.
Timing key:
– Press the "Timing" symbol key, "Time" flashes at the
lower right of the LCD screen, press "+" or "-" key to
set the scheduled countdown shutdown clock, and
the setting will be automatically saved 5 seconds
after the countdown clock is set, and the LCD screen
will enter and display the timer countdown. When the
countdown clock returns to zero, the product will stop
working and the heating indicator will go out.
– Hold down the timing button for 3 seconds to dis-
able timing Settings.
Wifi connection:
– When the product is successfully connected, the
clock in the lower right corner of the LCD will syn-
chronize with the phone to display the current
time.
Intelligent graffiti control software download method
– Open the phone and scan the QR
code below
– Click open from the browser;
– Click to download and install;
WIFI connection
A. Automatic search:
– Turn on the Bluetooth function;
– Open the downloaded "APP";
– Click automatic discovery;
– Click the device searched;
– Click "+" on the device name to enter the network
name and password of the device to add the device.
B. Faster flash state:
– Turn on the mechanical switch on the side of
the product and touch the power button of the
LCD. The LCD lights up. The default tempera-
ture of the LCD is 37 degrees.
– Long press the WIFI symbol button for 6 sec-
onds, the indicator light is on and enters the
flash state. If the WIFI indicator is already in the
flash state, this operation is omitted.
– Open the "Smart life" software on the mobile phone
to enter the phone number to get verification code;
– Enter the verification code and click login;
– Click Add Device to select the wireless LAN,
and enter the WIFI password and click OK to
connect the device;
– When the phone interface shows the addition is
successful, and the WIFI indicator on the device
stops flashing and turns into being long lit, then
it means that the addition is complete.
C. If the phone screen shows that the connection
failed, you need to change the WIFI icon to a slow
blinking state.
– In the state of flash, press the button of WIFI reset on
the side of the switch Hold down the wifi symbol but-
ton for 6 seconds to switch to the slow blinking state;
– open the phone, connect the WIFI named
"Smart life" (without passpord).
– Open the "Smart life" software on the mobile
phone to connect the device.
– When the phone interface shows the addition is
successful, and the WIFI indicator on the device
stops flashing and turns into being long lit, then
it means that the addition is complete.
Remote operation by mobile phone
– Switch on the power supply of the device, open
the mechanical switch, and click the power button
of the LCD screen to make the device in standby
state
• Temperature setting:
– Open the "Smart life" software to select the device
(if you use a mobile phone to control more than two
devices, you need to select the device to operate);
– Tap the device to be operated. The device opera-
tion screen is displayed. The power button at the
lower left corner of the mobile phone screen is OFF.
• If you click the switch, the power button at the bot-
tom left of the phone APP screen will display "on".
The color on the phone screen brightens, indicat-
ing that the device is powered on.
– Press "+" or "-" to set the temperature;
– When the setting temperature is higher than the
ambient temperature, the device begins to heat;
otherwise the device is in the to-be-heated state.
• Power-on reservation:
– Open the "Smart life" software to select the
operating device;
– Click the device to be operated and enter the
device operation interface, while the power but-
ton on lower left corner of the mobile phone inter-
face will display OFF and the device is turned off;
– Click the timer icon, add schedule, adjust the
switch status to ON, select the boot time, week and
temperature(maximum setting temperature 37°C),
and click the "Save" button to save the settings.
• Shutdown reservation:
– Open the "Smart life" software to select the
operating device;
– Click the device to be operated and enter the
device operation interface;
– Click the power button which will display ON
and enter the power-on state;
– Click the timer icon, add schedule, adjust the switch
status to OFF, select the boot time and week, and
click the "Save" button to save the settings.
GB
25
Publicité
