BoomToneDJ LUDIBEAM RGBW Mode D'emploi page 21

DISPLAY INVERSE
To select the
the UP/DOWN button to select the
button to setup. Back to the functions without any change press MENU button.
TILT 1 INVERSE
To select the
Use the UP/DOWN button to select the
mode. Once the mode has been selected, press the ENTER button to setup, to go back to
the functions without any changes press the MENU button again. Hold and press the MENU
button for one second or wait for one minute to exit the menu mode.
TILT 2 INVERSE
To select the
Use the UP/DOWN button to select the
mode. Once the mode has been selected, press the ENTER button to setup, to go back to
the functions without any changes press the MENU button again. Hold and press the MENU
button for one second or wait for one minute to exit the menu mode.
REV MODE
To select the
, press the ENTER button to show the DISPLAY on the display. Use
, press the ENTER button to show the TILT 1 INVERSE on the display.
, press the ENTER button to show the TILT 2 INVERSE on the display.
,press the ENTER button to show the REV on the display. Use the
(normal) or
(tilt 1 inversion) or
(tilt 2 inversion) or
20
(inversion), press ENTER
(normal)
(normal)