Slave Mode - BoomToneDJ LUDIBEAM RGBW Mode D'emploi

DMX 512 ADDRESS
To select the press the ENTER button to show the DMX ADDRESS on the display.
Use the button to adjust the address from 1 to 512. Once the address has been selected,
press the ENTER button to setup, to go back to the functions without any changes press the
MENU button again. Hold and press the MENU button for one second or wait for one minute
to exit the menu mode
.
CHANNEL MODE
To select the , press the ENTER button to show the DMX CHANNEL MODE on
the display. Use the UP/DOWN button to select the 1, 6, 12 channel modes. Once the mode
has been selected, press the ENTER button to setup, to go back to the functions without any
changes press the MENU button again. Hold and press the MENU button for one second or
wait for one minute to exit the menu mode.

SLAVE MODE

To select the , press the ENTER button to show the SLAVE MODE on the display.
Use the UP/DOWN button to select the (MASTER), (SLAVE1),
(SLAVE 2) modes. Once the mode has been selected, press the ENTER button to setup, to
go back to the functions without any changes press the MENU button again. Hold and press
the MENU button for one second or wait for one minute to exit the menu mode.
SHOW MODE
To select the press the ENTER button to show the SHOW MODE on the display.
18