Télécharger Imprimer la page

Ryobi RYRM8001CAN Manuel D'utilisation page 13

Masquer les pouces Voir aussi pour RYRM8001CAN:

Publicité

WARNING:
Do not allow familiarity with products to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
WARNING:
Always turn off mower, make sure blades have stopped
moving, and remove the start key from the mower when
you are assembling parts, making adjustments, cleaning,
or when not in use. This will prevent accidental starting
that could cause serious personal injury.
WARNING:
Always inspect mower for missing or damaged parts and
blades for damage or uneven or excessive wear prior to
use. Use of the mower with damaged or missing parts
can result in serious personal injury.
NOTICE:
Before each use, inspect the entire product for damaged,
missing, or loose parts such as screws, nuts, bolts, caps,
etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts
are replaced. Please contact customer service or an
authorized service center for assistance.
APPLICATIONS
You may use this product for the purpose listed below:
„ Mowing your lawn
OPERATION
DISCHARGE
CHUTE
INSTALLING THE SIDE DISCHARGE CHUTE
See Figure 2.
The mower comes prepared for mulching with the spring-
loaded mulching cover already in place. If side discharge is
desired, install the side discharge chute.
„ Remove start key and battery pack.
„ Lift and hold the mulch cover.
„ Insert the side discharge chute as shown, aligning the two
notches with the tabs on each side of the mulch cover.
„ Lower the mulch cover until the tabs are seated into the
notches on the side discharge chute.
„ Reinstall start key and battery pack when you are ready
to mow.
13 — English
SLOT
TAB
SIDE
MULCH
COVER
Fig. 2

Publicité

loading

Ce manuel est également adapté pour:

Ryrm8001