Ryobi RYRM8001 Guide De Démarrage Rapide

WARNING:
This Quick Start Guide is not a substitute for reading and following the operator's manual. To reduce the risk
of death or serious injury, user must read and understand the operator's manual before using this product.
Operating the Mower:
1 Test the safety interlock system. See page 17 in the operator's
manual for details.
2 Adjust the seat to desired position.
3
Verify battery charge level by pressing the mode button on the
LCD Screen. Charge if needed.
4
Raise the mower deck to its highest position.
5
Make sure the joystick is in the locked, neutral position.
See page 18 in the operator's manual
6
Insert the start key and turn to ON position.
7 Release parking brake.
8
Drive to desired mowing location. For detailed driving instruc-
tions, see page 18 in the operator's manual.
9
Stop mower, place the joystick in the locked, neutral position, and
set the parking brake.
10
Lower cutting deck to desired position.
11
Turn start key to ON position, raise the joystick from the locked,
neutral position, and release parking brake.
12 Raise blade engage knob to activate blades and mow as desired.
When Finished:
1
Stop mower on a flat, level surface.
2
Push blade engage knob down to turn blades off.
3
Place the joystick in the locked, neutral position.
4
Set parking brake.
5
Turn key off.
Go to www.ryobitools.com and register your new tool online.
For any questions about operating or maintaining your product,
call the RYOBI Help Line! Your product has been fully tested prior
to shipment to ensure your complete satisfaction. Troubleshooting
tips are also available in your operator's manual.
QUICK START GUIDE
6 9 11 5
5 8 9 1 3
3
7 8 10 1 4
RYRM8001
3
12 2
4 10
2
998000966
3-11-22 (REV:01)
1