Control panel Locking
To avoid modification of the setting of the cooking zones , in particular during cleaning, the
control panel can be locked (with exception to the On/Off key [ 0/I ]).
Lock :
Action
Start
Locking the hob
Once the hob locked, a 10 seconds countdown starts. During this countdown, you can unlock the
hob. Once past this time, the release becomes impossible, you must shut down and re-ignite the
hob. At each selection of [ P ] key, a segment of [ L ] appears. The hob is locked when the [ L ] is
complete.
Unlock :
Action
Start
In the 10 seconds after start :
Unlock the hob
At each selection of [ P ] key, a segment of [ L ] disappears. The hob is unlocked when the [ L ]
disappears.
COOKING ADVICES
Pan quality
Adapted materials : steel, enamelled steel, cast iron, ferromagnetic stainless-steel,
Not adapted materials : aluminium and stainless-steel without ferromagnetic bottom,
The manufacturers specify if their products are compatible induction.
To check if pans are compatibles :
Put a little water in a pan placed on an induction heating zone set at level [ 9 ].This water
must heat in a few seconds.
A magnet stucks on the bottom of the pan.
Certain pans can make noise when they are placed on an induction cooking zone. This noise
doesn't mean any failure on the appliance and doesn't influence the cooking operating.
Pan dimension
The cooking zones are, until a certain limit, automatically adapted to the diameter of the pan.
However the bottom of this pan must have a minimum of diameter according to the
corresponding cooking zone.
To obtain the best efficiency of your hob, please place the pan well in the centre of the cooking
zone.
Control panel
press on key [ 0/I ]
Hold a finger on the "SLIDER"
and press 3 times on the [ P ]
Control panel
press on key [ 0/I ]
Hold a finger on the "SLIDER"
and press 3 times on the [ P ]
aluminium with ferromagnetic bottom.
cupper, brass, glass, ceramic, porcelain.
55
Display
[ 0 ] or [ H ]
[ L ]
Display
[ L ]
[ 0 ] or [ H ]