Control Panel Locking; Cooking Advices; Pan Quality - Novy Flex Zone 1706 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Stop&Go function
This function brakes all the hob's cooking activity and allows restarting with the same settings.
 Start up / Stop the pause function
Action
Engage Stop&Go
Stop the Stop&Go
Recall Function
After switching off the hob (0/I), it is possible to recall the last settings.
 cooking stages of all cooking zones (power)
 minutes and seconds of programmed cooking zone-related timers
 Heat up function
 Keep warm function
The recall procedure is following:
 Press the key [0/I]
 Then press the key [ II ] within 6 seconds
The precedent settings are activated.

Control panel locking

To avoid modifying a setting of cooking zones , in particular with within the framework of
cleaning the control panel can be locked (with exception to the On/Off key [ 0/I ]).
 Locking
Action
Hob locking
 Unlocking
Action
Hob unlocking
When you start and if the locking function is on, you have 10s to unlock the hob.

COOKING ADVICES

Pan quality

Adapted materials: steel, enamelled steel, cast iron, ferromagnetique stainless-steel,
aluminium with ferromagnetique bottom.
Not adapted materials: aluminium and stainless-steel without ferromagnetique bottom,
cupper, brass, glass, ceramic, porcelain.
The manufacturers specify if their products are compatible induction.
To check if pans are compatibles :
 Put a little water in a pan placed on an induction heating zone set at level [ 9 ].This
water must heat in a few seconds.
A magnet stucks on the bottom of the pan.
Certain pans can make noise when they are placed on an induction cooking zone. These
noise doesn't mean any failure on the appliance and doesn't influence the cooking operating.
Control panel
Press [ II ] key
Press [ II ] key
and press any key [ + ] or [ - ]
Control panel
Press "
" key during 2s
Control panel
Press "
" key during 2s
51
Display
displays [ II ] in the
heating zone displays
pause control light is
blinking.
Display
Locking control light is on
Display
Locking control light is on

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Flex zone 1786

Table des Matières