Keep Warm » Function; Control Panel Locking; Cooking Advices; Pan Quality - Novy 1713 Mode D'emploi Et D'installation

« Keep warm » Function
This function allows to reach and maintain automatically a temperature of 70°C.
This will avoid liquids overflowing and fast burning at the bottom of the pan.
 To engage, to start the function « Keep warm » :
Action
Zone selection
To engage
To stop
This function can be started independently on all the heating zones.
When the pan leaves the cooking zone of the "Keep warm" function remains active during
approximately 10 minutes.
The maximum duration of keeping warm is 2 hours.

Control panel locking

To avoid modifying a setting of cooking zones, in particular during cleaning, the control panel can
be locked (with exception to the On/Off key [ 0/I ]).

Locking :
Action
Start
Hob locking

Unlocking :
Action
Start
In the 5 seconds after start :
Unlocking the hob

COOKING ADVICES

Pan quality

Adapted materials : steel, enamelled steel, cast iron, ferromagnetic stainless-steel,
Not adapted materials : aluminium and stainless-steel without ferromagnetic bottom,
The manufacturers specify if their products are compatible with induction.
To check if pans are compatibles :
Control panel
press display [ 0 ] selected
press on key [ U ] on the "SLIDER"
press on display [ U ] selected
slide on the "SLIDER"
Control panel
press on key [ 0/I ]
press simultaneously [ P ] and [ 0 ]
from the right zone display
re-press on display [ 0 ] from the right
zone display
Control panel
press on key [ 0/I ]
press simultaneously [ P ] and
[ L ] from the right zone display
press on key [ P ]
aluminium with ferromagnetic bottom.
cupper, brass, glass, ceramic, porcelain.
54
Display
[ 0 ] to [ 9 ] or [ H ]
[ U ]
[ U ]
[ 0 ] to [ 9 ] or [ H ]
Display
[ 0 ] or [ H ] on displays
no modification
[ L ] on displays
Display
[ L ] on displays
[ 0 ] or [ H ] on displays
no light on the displays