Publicité
Before you use your stairlift, please read all of these instructions
carefully.
This stairlift has been designed to carry one person in a seated position.
Do not allow children to play on or near the stairlift.
The boarding/exit area of the stairlift must be kept well lit (to at least 50 Lux).
If you are not able to safely get on or off this lift independently, seek
assistance from someone who can help you.
When you are not using the stairlift, please park it on one of the charging
points (15).
HOW TO USE YOUR STAIRLIFT
Getting On The Stairlift
1.
Fold down the footplate (9).
2.
Fold down the seat if it is raised, and ensure it is locked in the
correct position so you can sit on it safely. (6)
3.
Fold down the armrests (3).
4.
Sit on the seat and fasten the safety belt (8).
5.
If required, swivel the seat back into the correct traveling
position and place your feet firmly on the footplate (9).
Travelling Up Or Down The Stairs
1.
Keep your feet on the footplate (9) and your arms on the
armrests (3).
2.
Press and hold the control device (5) in the direction you
wish to travel. There will be a short delay and then the stairlift
will slowly move off. The stairlift may adjust its speed as it
travels along the rail, to ensure a smooth and comfortable
journey.
3.
Keep the control device pressed in the direction of travel until
the stairlift comes to a complete stop. For lifts with a power
swivel, ensure that the seat has swivelled into the correct
position to exit the lift.
4.
To stop the lift during travel or change direction, release
the controller, wait for a few seconds and then operate the
controller in the direction you wish to travel. After a short
delay, the lift will move off.
Getting Off The Stairlift
1.
The seat must be in a position for you to get off it safely. This
may mean swivelling the seat. On a manual swivel this is
done by moving either of the seat swivel levers up. (7)
If your lift is fitted with the powered swivel option, keep
your finger pressed on the control device and the lift will
automatically swivel away from the steps.
2.
Unfasten the safety belt and get out of the seat. (8)
3.
If it is required, fold up the seat and armrests (3) and
footplate (9).
Remote Control
1.
To move the stairlift without a passenger, or to assist a seated
passenger, press and hold down the appropriate direction
button on the remote control (16).
2.
Use the PARK button on the remote control to send the lift to
a charging point. The lift can only be sent upwards to the
nearest point, if you want it to come downwards you must
press the DOWN arrow.
3.
If the stairlift is to be moved without a passenger, the seat
must be returned to its correct traveling position. The safety
belt is not required when operating the lift from a remote
control.
9
Publicité
