Publicité
5.2. SETTING FANSPEED
1. Select the mode that you want to adjust: Cooling
2. Select the speed that you want to adjust:
3. Short press [-] or [+] to adjust the preset speed.
1
-
The blue LED flashes quickly when
the minimum speed is
SPEED %
50
55
60
65
4. After 30 seconds, the new settings are automatically saved and the device returns to the selected mode.
5.3. FACTORY RESET
1. Disable power charge.
2. Press and hold down both the [-] and [+] button on the circuit board and switch on
the power again. The blue LED will light up, followed by the green LED 2 seconds
later and the red LED 4 seconds later. Release the buttons as soon as all 3 LEDs are
flashing.
3. The controller will return to the Factory Default settings, all LEDs will flash for 8
seconds..
JAGA NV | VERTIGA HYBRID | MANUEL | 11 okToBER 2024, 10:44 | V.2.05
-
+
/
Heating
10 sec
reached.
70
75
80
85
O
The red LED flashes quickly
when the
maximum speed is reached.
90
95
100
105
1
1
-
110
115
120
-
41
-
+
-
+
EN
Publicité
