EINHELL GP-LS 18/28 Li T BL Instructions D'origine page 21

•
With the blade fully open, switch off the tool
and remove the battery.
•
Sharpen the cleaned cutting blade with a sui-
table grinding tool (e.g. a wet grinding stone,
wet grinding paper).
•
There are no other parts inside the tool which
require maintenance.
7.3 Ordering spare parts and accessories
Please provide the following information when
ordering spare parts:
•
Type of unit
•
Article number of the unit
•
ID number of the unit
•
Spare part number of the required spare part
For our latest prices and information please go to
www.Einhell-Service.com
8. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should be
taken to a suitable collection center for proper dis-
posal. If you do not know the whereabouts of such
a collection point, you should ask in your local
council offi ces.
9. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30 °C.
Store the electric tool in its original packaging.
Anl_GP_LS_18_Li_T_BL_SPK13.indb 21 Anl_GP_LS_18_Li_T_BL_SPK13.indb 21
GB
- 21 -
23.07.2024 08:36:23 23.07.2024 08:36:23