Télécharger Imprimer la page

EINHELL GP-LS 18/28 Li T BL Instructions D'origine page 17

Cisaille pour branches sans fil

Publicité

Inspect the equipment and accessories for
transport damage.
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
Cordless branch shears with blade guard
hood
Telescopic tube
Guard handle, screws
Original operating instructions
Safety instructions
3. Proper use
This tool is designed for cutting branches and
plants with a diameter of max. 28mm.
This tool is not suitable for cutting metal.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
4. Technical data
Motor power supply: ............................... 18 V DC
Cutting capacity max. Ø: .......................... 28 mm
Weight without the telescopic tube: ......... 0.82 kg
Weight with the telescopic tube: .............. 2.04 kg
Caution!
The equipment is supplied without batteries and
without a charger and is allowed to be used only
with the lithium-ion batteries of the Power X-
Change series!
The lithium-ion batteries of the Power X-Change
series are allowed to be charged only with the
Power X charger.
Anl_GP_LS_18_Li_T_BL_SPK13.indb 17
Anl_GP_LS_18_Li_T_BL_SPK13.indb 17
GB
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
L
sound pressure level ................... 69.63 dB(A)
pA
K
uncertainty ............................................. 3 dB
pA
L
sound power level ...................... 77.63 dB(A)
WA
K
uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841.
Vibration emission value a
K uncertainty = 1.5 m/s
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Keep the noise emissions and vibrations to a
minimum.
Only use appliances which are in perfect wor-
king order.
Service and clean the appliance regularly.
Adapt your working style to suit the appliance.
Do not overload the appliance.
Have the appliance serviced whenever ne-
cessary.
Switch the appliance off when it is not in use.
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
- 17 -
≤ 2.5 m/s
2
h
2
23.07.2024 08:36:21
23.07.2024 08:36:21

Publicité

loading

Ce manuel est également adapté pour:

34.083.30