Publicité
Model(s): 2400 • 2404
slide the door shaft seat (l) into the upper square hole�
STEP 06
Use one (1) M4x12 screw
[b.]
to attach the door shaft seat to the front
of the oven�
To power the motor:
STEP 08
OPTION A: Plug the power cord
into the motor�
OPTION B: Insert four (4) AA
batteries into the motor�
(do NoT use the batteries and
the AC power supply at the
same time�)
Heavy pieces. Two people should assemble this appliance.
Assembly time: ~30 min
Assembly time: ~30 min
BLACKSTONEPRODUCTS.COM
CAUTIoN
ASSEMBLY GUIDE
slide the door shaft into the (l) seat� slide the door shaft seat
STEP 07
(R) onto the door shaft�
slide the door shaft seat (R) into the upper square hole� Use one (1)
M4x12 screw
[b.]
to secure to the front of the oven�
Proceed to the OPERATION INSTRUCTIONS�
STEP 09
Heavy pieces. Two people should assemble this appliance.
Assembly time: ~30 min
Assembly time: ~30 min
NOTICE
• DO NOT mix old and new batteries.
• DO NOT mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, etc.) batteries.
NOTICE
Place appliance on a heat-resistant and flame-resistant
surface while in use.
NOTICE
The paper towel holder arm must be in the open position
while the appliance is in use.
| OWNER'S MANUAL
CAUTIoN
CAUTIoN
Pl
su
Ho
ap
DO
07
Publicité
