Publicité
Model(s): 2400 • 2404
CLEANING THE BURNER ASSEMBLY
n the
All cleaning and maintenance should be carried out when the
he
appliance is cool and with the fuel supply turned OFF at the
gas cylinder.
ri tube
Run a nylon brush over
STEP 01
the outer surface of the burner to
ri tube
remove grime�
elow
st
f time�
STEP 02
❶ ❶ Remove the base panel cover
from the base of the unit�
e
❷ ❷ disconnect the orifice
nozzle and gas line from the
ved
burner tube�
Use compressed air to
STEP 03
clear the burner tubes�
Note: once reinstalled, the
gas line should be leak tested
to ensure there are no holes
in the line�
The gas rail fuel nozzle
must be reengaged within the
burner opening�
Wear
do
ion)
BLACKSTONEPRODUCTS.COM
CAUTIoN
❷ ❷
❶ ❶
Fuel nozzle
Fuel nozzle
Burner opening
Burner opening
TROUBLESHOOTING
| OWNER'S MANUAL
13
Publicité
