Publicité
• When servicing a tool, use only identical replacement parts. Follow instructions in the
Maintenance section of this manual. Use of unauthorized parts or failure to follow
Maintenance Instructions may create a risk of electric shock or injury.
CLEANING
Clean dust and debris from vents. Keep handles clean, dry and free of oil or grease. Use only mild
soap and adamp cloth to clean, since certain cleaning agents and solvents are harmful to plastics
and other insulated parts. Some of these include gasoline, turpentine, lacquer thinner, paint
thinner, chlorinated cleaning solvents,ammonia and household deter-gents containing ammonia.
Never use flammable or combustible solvents around tools.
STORAGE & DISPOSAL
Switch the miter saw off and unplug it.
Store the miter saw and its accessories in a dark, dry,frost-free, well-ventilated place.
Always store the miter saw in a place that is inaccessible to children. The ideal storage temperature
is between 10 °C and 30 °C.
We recommend using the original package for storage or covering the miter saw with a suitable
cloth or enclosure to protect it against dust.
TRANSPORTATION
Switch the miter saw off. Protect the miter saw from any heavy impact or strong vibrations which
may occur during transportation in vehicles.Secure the miter saw to prevent it from slipping or
falling over.
12. TROUBLESHOOTING
Problems
No electricity arrives at the machine
The motor is overloaded or Over heated
Device doesn't start
On/off switch may be defective
Engine faulty
Screws or parts are loose
Vibrations are too
The miter saw is not correctly mounted Remove blockages
strong
Work piece is not properly supported
Blade does rotate
Blade nut is loosen
smoothly, abnormal
Blade is defective
noises can be heard
Probable causes
Check the power supply and the power line.
Allow the machine to run idle for about 2 mins
to cool dow
Repair by customer care
Repair by customer care
Secure the work piece
Tighten blade nut
Change blade
Corrective action
FR
ES
PT
IT
EL
PL
UA
RO
EN
229
229
Publicité
